You can add products to the watchlist and compare them with one another or send us an inquiry. There are watchlist symbols on product pages and product tables for this purpose.
Este producto ya no se fabrica. Es posible que queden existencias. Consulte las alternativas que figuran a continuación en "Productos similares" o póngase en contacto con nosotros directamente.
Productos alternativos para este producto descatalogado:
A cost effective strategy to perform both irradiance and radiance measurements is to outfit RW-37 and UV-37 series irradiance detectors with front lens adapters. The radiance adapters limit the field of view of the irradiance detector to enable radiance measurement in W/(m²sr) of larger area radiance sources.
Simple Assembly
The SRT-M37L series front lenses attach to the front of the 37-type type detector housings using the SRT-M45/37 base mount which fits onto the detector housing and is held in place with set screws. The SRT-M45/37B is internally threaded (M37x1) so that the externally threaded SRT-M37L front lens can be screwed into it. The SRT-M45/37B base mount has an M6 and standard camera (1/4”-20 BSW) threaded hole for tripod or bench post or to fixture the device into an application.
1° to 10° Selectable Field-of-Views
Front lenses with 1°, 2°, 5° and 10° are available.
Traceable Calibrations
Lens and detector assembly is calibrated in radiance sensitivity in W/m²sr at Gigahertz-Optik’s Calibration Laboratory for Optical Radiation Quantities.
Detector head with M30x1 mount. Features: modular detector for use MD-37, SRT and other accessories, Si, SiLP, InGaAs, SiC, GaP photodiodes, for use with optometers and signal amplifiers
