You can add products to the watchlist and compare them with one another or send us an inquiry. There are watchlist symbols on product pages and product tables for this purpose.
Este producto ya no se fabrica. Es posible que queden existencias. Consulte las alternativas que figuran a continuación en "Productos similares" o póngase en contacto con nosotros directamente.
Productos alternativos para este producto descatalogado:
RCH-013
Irradiance Detector for UV or Blue light curing processes
Separate light entrance optic and sensor position with flexible fiber coupling
In UV curing applications for surface and deep curing, radiation in the UV and visible spectral range is used to excite the photoinitiators. UV radiometers for applications in which LED technology is used for irradiation must be designed in such a way that the irradiance is measured within the spectral range emitted by the LED. See our application note about general UV curing measurements and our product overview about UV curing meters.
Product Description RCH-013 Irradiance Detector for UV Curing
The RCH-013 UV detector was specially developed for use in UV curing with UV LEDs. They offer all the features and functions of the RCH series detectors (see RCH-xxx Series). Their spectral responsivity covers the wide wavelength range from 240 nm to 550 nm and thus applications for surface and deep curing.
Calibration
The detectors are calibrated in 5 nm steps with regard to their spectral irradiance responsivity and are supplied with a factory calibration certificate that corresponds to the high standard of the measuring laboratory for optical radiation measurements of Gigahertz-Optik. If necessary, a test certificate accredited according to DIN EN ISO / IEC 17025 can optionally be created for the detector with the associated measuring device.
Typical spectral responsivity (relative) of the RCH-x13 detectors
Relative spectral sensitivity of the RCH-x13 detectors together with some typical UV LED emission spectra
