You can add products to the watchlist and compare them with one another or send us an inquiry. There are watchlist symbols on product pages and product tables for this purpose.
Este producto ya no se fabrica. Es posible que queden existencias. Consulte las alternativas que figuran a continuación en "Productos similares" o póngase en contacto con nosotros directamente.
Productos alternativos para este producto descatalogado:
In UV curing applications requiring deep curing of adhesives and lacquers, radiation in the UV-A and blue (visible) spectral range is used to excite the photoinitiators. Sometimes NIR radiation is used to enhance the viscosity of the adhesives or simply heat it up for better chemistry performance.
Product description RCH-117 irradiance detector
The RCH-117 NIR detector was specially developed for use in NIR radiation curing with LEDs. It offers all the features and functions of the RCH high temperature stable and flat design series. Its spectral responsivity covers the spectrally approximately flat wavelength range from 650 nm to 970 nm. The RCH-117 version is based on a rigid fiber.
Calibration
The detector is calibrated for typical NIR LED wavelengths in terms of its spectral irradiance responsivity and is supplied with a factory calibration certificate that corresponds to the high standard of the measuring laboratory for optical radiation measurements of Gigahertz-Optik. If necessary, a test certificate accredited according to DIN EN ISO / IEC 17025 can optionally be created for the detector with the associated measuring device.
typical spectral sensitivity (relative) of the RCH-017 detector
