This product is no longer manufactured. Remaining stock may still be available. Please refer to the alternatives listed below under "Similar products" or contact us directly.

Alternative Products for this discontinued product:

High-speed dual input optometer for measurement of CW, modulated radiation and optical fibers in W

P-9801

8-Channel High Class Current Amplifier/Optometer

P-21

Multi-Purpose Touchscreen Optometer for Measurement of CW-, Single Pulse and Modulated Radiation in any Photometric and Radiometric Application

TR-22 Ultra Fast Transient Recorder

Ultra fast transient recorder with 4 ns sampling rate and trigger options enable many analyses

P-9202-6

Highly sensitive trans-impedance signal amplifier

High quality analogue amplifier with current-voltage conversion
Minimal diode offset voltage (0.5mV) for short circuit photodiode operation
2.5s to 25s rise time depending on the amplification
Large I-U amplification range – 1·10^-11A/V to 1·10^-4 A/V

Transimpedance amplifier for Light Detectors

Silicon, Germanium and Indium Gallium Arsenide Photodiodes offer best linearity correlation of light input to their electrical signal when are operated in photovoltaic mode. Simulation of a real short circuit at a signal amplifier input requires a current to voltage conversion amplifier with very low offset voltage independent of the selected gain range.

Low noise output signal

The P-9202 amplifiers assembled in a metal shielding housing equipped with low noise feedback resisters and gold contact read-relays for gain selection offer very low noise voltage signals.

Short rise time model P-9202-4

The P-9202-4 model is a fast amplifier with a 8-step switchable sensitivity range from 300 nA/V to 1 mA/V and a nearly constant slew-rate of 1 µs in all gain ranges. Photodiodes can be operated in photovoltaic or photodiode mode (-5 V bias voltage). Useful in applications requiring high bandwidth up to 1 MHz or short 1 µs rise time.

General purpose model P-9202-5

The P-9202-5 model is a general purpose amplifier featuring an 8-step switchable sensitivity range from 100 pA/V to 1 mA/V and gain dependent slew-rate. Photodiodes can be operated in photovoltaic or photodiode mode (-5 V bias voltage).

Very high gain model P-9202-6

The P-9202-6 model is a very high sensitivity amplifier with an 8-step switchable sensitivity range from 10 pA/V to 100 µA/V and variable, gain dependent slew rates. This model is suited to applications involving very low photodiode signals starting in the 10 femto A (0.01 pA) range.