This product is no longer manufactured. Remaining stock may still be available. Please refer to the alternatives listed below under "Similar products" or contact us directly.
Alternative Products for this discontinued product:
![BTS256-LED Tester BTS256-LED Tester](https://www.gigahertz-optik.com/assets/Uploads-v2/BTS256-LED__ScaleMaxWidthWzIwMF0.jpg)
![BTS256-LED-UV BTS256-LED-UV](https://www.gigahertz-optik.com/assets/Uploads-v2/BTS256-LED-UV__ScaleMaxWidthWzIwMF0.jpg)
BTS256-LED-IR
Compact BiTec Spectroradiometer NIR-LED Tester for the Measurement of Radiant Power of Single VIS and NIR LEDs
- Innovative implemented small integrating sphere with cone-shaped measurement port
- Auxiliary lamp for substitution correction (self-absorption correction)
- BiTec Sensor* for highest measurement accuracy
- Measurands like spectral radiant power and derived quantities
- Plug & Play testing of IR LED
![BTS256-LED-IR BTS256-LED-IR](https://www.gigahertz-optik.com/assets/Uploads-v2/BTS256-LED-IR__ScaleMaxWidthWzUwMF0.jpg)
The optical specifications of NIR LEDs must commonly meet very high tolerance requirements even for non-specialist applications such as general and automotive lighting. This is often a problem since the manufacturing tolerances of NIR LEDs can be higher than those permitted in the applications. The tolerance limits of NIR LEDs regardint intensity and spectral characteristics as the peak wavelength are only applicable if the operating conditions are similar to those in the binning tests. Therefore, manufacturers incorporating NIR LEDs into their products require devices that can accurately measure the precise in-situ photometric performance of NIR LEDs.
Compact spectroradiometer and NIR LED Tester
The compact BTS256-LED-IR enables you to conveniently measure the radiant power and spectral data of single NIR LEDs. One special feature is the conical measurement port of the device. The ability to perform measurements in seconds of onboard NIR LEDs makes it possible to also include thermal effects in the measurement. The device is therefore ideal for inspection of incoming products as well as the quality control in production processes. It can also be very useful in the design department.
The BTS256-LED-IR comes in a compact aluminum housing and offers all functions that are necessary for precise measurements.
Traceable Calibration
One essential quality of measuring devices is their precise and traceable calibration. Calibration of the BTS256-LED-IR is performed in Gigahertz-Optik’s ISO/IEC 17025 calibration laboratory that is accredited by DAkkS (D-K-15047-01-00) for the spectral responsivity and spectral irradiance according to ISO/IEC 17025. The device has two calibrations: one is done using a specially developed reference lamp offering 2pi illumination which enables precise measurement of the luminous flux of diffusely emitting LEDs. The second calibration is for sources that have narrower illumination characteristics.
Options for the BTS256-LED-IR
- Software development kit to enable users to integrate the device in their own software
- Extension to the BTS256-LED Plus Concept (for other measured quantities) using other components
![1) BTS256-LED-IR housing 2) 50 mm integrating sphere with synthetic coating 3) Conical measurement port 4) Precision bayonet mount 5) Test LED on a printed circuit board (device under test) 6) Remote-controlled auxiliary lamp 7) BiTec sensor with Si photodiode, CMOS diode array spectrometer and shutter 8) Microprocessor 9) USB 2.0 interface 1) BTS256-LED-IR housing 2) 50 mm integrating sphere with synthetic coating 3) Conical measurement port 4) Precision bayonet mount 5) Test LED on a printed circuit board (device under test) 6) Remote-controlled auxiliary lamp 7) BiTec sensor with Si photodiode, CMOS diode array spectrometer and shutter 8) Microprocessor 9) USB 2.0 interface](https://www.gigahertz-optik.com/assets/Uploads/BTS256-LED-Draft__ScaleMaxWidthWzUwMF0.png)
1) BTS256-LED-IR housing 2) 50 mm integrating sphere with synthetic coating 3) Conical measurement port 4) Precision bayonet mount 5) Test LED on a printed circuit board (device under test) 6) Remote-controlled auxiliary lamp 7) BiTec sensor with Si photodiode, CMOS diode array spectrometer and shutter 8) Microprocessor 9) USB 2.0 interface
![The conical measurement port is placed over the test LED and detects all the radiation in a 2pi space The conical measurement port is placed over the test LED and detects all the radiation in a 2pi space](https://www.gigahertz-optik.com/assets/04-led-tester-IR__ScaleMaxWidthWzUwMF0.jpg)
The conical measurement port is placed over the test LED and detects all the radiation in a 2pi space
Similar Products
![BTS256-LED-IR](https://www.gigahertz-optik.com/assets/Uploads-v2/BTS256-LED__ScaleMaxWidthWzIwMF0.jpg)
![BTS256-LED-IR](https://www.gigahertz-optik.com/assets/Uploads-v2/BTS256-LED-UV__ScaleMaxWidthWzIwMF0.jpg)
Product Categories